Skip to main content
Advanced Modeling and Simulation in Engineering Sciences
Advanced Modeling and Simulation in Engineering Sciences Cover Image

Articles

Page 5 of 5

  1. First, the effectivity of classical Proper Generalized Decomposition (PGD) computational methods is analyzed on a one dimensional transient diffusion benchmark problem, with a moving load. Classical PGD method...

    Authors: Pierre-Eric Allier, Ludovic Chamoin and Pierre Ladevèze
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:17
    Content type: Research article Published on:

  2. Contact mechanics involves models governed by inequality constraints. Even for the simplest contact problem, inequalities arise from the lack of information on the contact zone position. In addition to increa...

    Authors: Matthieu Graveleau, Nicolas Chevaugeon and Nicolas Moës
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:16
    Content type: Research article Published on:

  3. Despite using very large parallel computers, numerical simulation of some forming processes such as multi-pass rolling, extrusion or wire drawing, need long computation time due to the very large number of tim...

    Authors: Ugo Ripert, Lionel Fourment and Jean-Loup Chenot
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:15
    Content type: Research article Published on:

  4. The shock response of metallic single crystals can be captured using a micro-mechanical description of the thermoelastic–viscoplastic material response; however, using a such a description within the context o...

    Authors: Jeffrey T Lloyd, John D Clayton, Ryan A Austin and David L McDowell
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:14
    Content type: Research article Published on:

  5. Simulation of wave propagation through complex media relies on proper understanding of the properties of numerical methods when the wavenumber is real and complex.

    Authors: Jay Gopalakrishnan, Stéphane Lanteri, Nicole Olivares and Ronan Perrussel
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:13
    Content type: Research article Published on:

  6. We present a robust method to obtain the displacement field of a dislocation core, which is one of the building blocks for the development of a direct multiscale method coupling an atomistic domain to a discre...

    Authors: Jaehyun Cho, Till Junge, Jean-François Molinari and Guillaume Anciaux
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:12
    Content type: Research Article Published on:

  7. In spite of the industrial significance, molecular mechanism of the strain hardening saliently observed in bidisperse polymeric liquids has not been elucidated yet. In this study, the multi-chain slip-link sim...

    Authors: Keiko Takeda, Sathish K Sukumaran, Masataka Sugimoto, Kiyohito Koyama and Yuichi Masubuchi
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:11
    Content type: Research article Published on:

  8. One question in the context of immersed boundary or fictitious domain methods is how to compute discontinuous integrands in cut elements accurately. A frequently used method is to apply a composed Gaussian qua...

    Authors: László Kudela, Nils Zander, Tino Bog, Stefan Kollmannsberger and Ernst Rank
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:10
    Content type: Research article Published on:

  9. The flow of suspensions through bifurcations is encountered in several applications. It is known that the partitioning of particles at a bifurcation is different from the partitioning of the suspending fluid, ...

    Authors: Gaetano D’Avino, Martien A Hulsen and Pier Luca Maffettone
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:9
    Content type: Research article Published on:

  10. The aim of this paper is to study two-time-scale nonlinear transient models and their associated parameter identification. When it is possible to consider two well-separated time scales, and when the fast comp...

    Authors: Guillaume Puel and Denis Aubry
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:8
    Content type: Research Article Published on:

  12. We propose an a posteriori estimator of the error of hyper-reduced predictions for elastoviscoplastic problems. For a given fixed mesh, this error estimator aims to forecast the validity domain in the paramete...

    Authors: David Ryckelynck, Laurent Gallimard and Samuel Jules
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:6
    Content type: Research Article Published on:

  13. The use of coarse-grained approximations of atomic systems is the most common methods of constructing reduced-order models in computational science. However, the issue of central importance in developing these...

    Authors: John Tinsley Oden, Kathryn Farrell and Danial Faghihi
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:5
    Content type: Research Article Published on:

  15. Recently the Double Absorbing Boundary (DAB) method was introduced as a new approach for solving wave problems in unbounded domains. It has common features to each of two types of existing techniques: local hi...

    Authors: Daniel Rabinovich, Dan Givoli, Jacobo Bielak and Thomas Hagstrom
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:3
    Content type: Research Article Published on:

  16. The design for vehicle structural crashworthiness which ensures that components of desired crash performance characteristics are used in product manufacturing essentially involves the evaluation of the energy ...

    Authors: Sunday M Ofochebe, Chigbogu G Ozoegwu and Samuel O Enibe
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:2
    Content type: Research article Published on:

  17. Computational homogenization is a well-established approach in material modeling with the purpose to account for strong micro-heterogeneity in an approximate fashion without excessive computational cost. Howev...

    Authors: Mikael Öhman, Kenneth Runesson and Fredrik Larsson
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2015 2:1
    Content type: Research Article Published on:

  18. It is a well-known fact that cross-laminated timber structures are sensitive to rumbling noises. These transmissions are best captured by a fully three-dimensional mathematical model. Since the discretization ...

    Authors: Thomas Horger, Stefan Kollmannsberger, Felix Frischmann, Ernst Rank and Barbara Wohlmuth
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:18
    Content type: Research Article Published on:

  19. Iodine-induced stress-corrosion cracking (ISCC), a known failure mode for nuclear fuel cladding, occurs when iodine generated during the irradiation of a nuclear fuel pellet escapes the pellet through diffusio...

    Authors: Matthew L Rossi, Christopher D Taylor and Adri CT van Duin
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:19
    Content type: Letter to the Editor Published on:

  20. The Thick Level Set model (TLS) is a recent method to delocalize local constitutive models suffering spurious localization. It has two major advantages compared to other delocalization methods. The first one i...

    Authors: Nicolas Moës, Claude Stolz and Nicolas Chevaugeon
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:16
    Content type: Research Article Published on:

  21. Models based on the Helmholtz `slip' approximation are often used for the simulation of electroosmotic flows. The objectives of this paper are to construct adjoint-consistent formulations of such models, and t...

    Authors: Vikram V Garg, Serge Prudhomme, Kris G van der Zee and Graham F Carey
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:15
    Content type: Research Article Published on:

  22. Seepage in porous media is modeled as a Stokes flow in an open pore system contained in a rigid, impermeable and spatially periodic matrix. By homogenization, the problem is turned into a two-scale problem con...

    Authors: Carl Sandstöm, Fredrik Larsson and Kenneth Runesson
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:12
    Content type: Research Article Published on:

    The Erratum to this article has been published in Advanced Modeling and Simulation in Engineering Sciences 2015 2:4

  24. In recent years, lot of research have been conducted on fictitious domain approaches in order to simplify the meshing process for computed aided analysis. The behaviour of such non-conforming methods is studie...

    Authors: Grégory Legrain and Nicolas Moës
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:13
    Content type: Research Article Published on:

  25. In this paper a non-exhaustive review is made on the existing literature for real-time simulation in the field of computational surgery. Many methods have been proposed so far to deal with the very astringent ...

    Authors: Elías Cueto and Francisco Chinesta
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:11
    Content type: Review Published on:

  26. Inverse form finding methods allow conceiving the design of functional components in less time and at lower costs than with direct experiments. The deformed configuration of the functional component, the appli...

    Authors: Sandrine Germain, Philipp Landkammer and Paul Steinmann
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:10
    Content type: Research article Published on:

  27. The water splash patterns strongly depend on the surface conditions of the solid object. The present paper discusses the influence of the surface conditions of the solids falling into the water on the formatio...

    Authors: Masao Yokoyama, Yoshihiro Kubota, Kenji Kikuchi, Genki Yagawa and Osamu Mochizuki
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:9
    Content type: Research article Published on:

  28. Indirect quad mesh generation methods rely on an initial triangular mesh. So called triangle-merge techniques are then used to recombine the triangles of the initial mesh into quadrilaterals. This way, high-qu...

    Authors: Tristan Carrier Baudouin, Jean-François Remacle, Emilie Marchandise, François Henrotte and Christophe Geuzaine
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:8
    Content type: Research article Published on:

  29. The prediction of the behavior of laminated composite structures up to final fracture continues to be a challenge today. Indeed, failure may occur due to the interaction of small-scale degradations, such as tr...

    Authors: Pierre Ladevèze, Federica Daghia, Emmanuelle Abisset and Camille Le Mauff
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:7
    Content type: Research article Published on:

  30. Membrane modeling in the presence of wrinkling is revisited from a multi-scale point of view. In the engineering literature, wrinkling is generally accounted at a macroscopic level by nonlinear constitutive la...

    Authors: Noureddine Damil, Michel Potier-Ferry and Heng Hu
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:6
    Content type: Research article Published on:

  32. The solution of 3D models in degenerated geometries in which some characteristic dimensions are much lower than the other ones -e.g. beams, plates, shells,...- is a tricky issue when using standard mesh-based ...

    Authors: Brice Bognet, Adrien Leygue and Francisco Chinesta
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:4
    Content type: Research article Published on:

  33. We consider a static condensation reduced basis element framework for efficient approximation of parameter-dependent linear elliptic partial differential equations in large three-dimensional component-based do...

    Authors: Jens L Eftang and Anthony T Patera
    Citation: Advanced Modeling and Simulation in Engineering Sciences 2014 1:3
    Content type: Research article Published on:
Submit manuscript

Follow

  • ISSN: 2213-7467 (electronic)