Fig. 4From: Classification and analysis of common simplifications in part-scale thermal modelling of metal additive manufacturing processesMeshing requirements for flash heating. The part is meshed using tetrahedral elements with \(r=0.05\) mm in accordance with \(\kappa =\sqrt{\alpha t_h}\) considering melting point \(\alpha \) for Ti6Al4V and \(t_h= \) \(t_f\) or \(\hat{t}_h=1\). The baseplate is meshed with linearly increasing element size from \(r=0.05\) to 0.5 mm, from top to bottomBack to article page