Skip to main content
Fig. 11 | Advanced Modeling and Simulation in Engineering Sciences

Fig. 11

From: A simple yet consistent constitutive law and mortar-based layer coupling schemes for thermomechanical macroscale simulations of metal additive manufacturing processes

Fig. 11

Two-dimensional example: final stress \(\sigma _{xx}\) over height z (zero is constrained bottom) at \(x={0.5}\,\hbox {mm}\) (see dashed line in Fig. 10): induced by a temperature peak moving in x-direction, constant in z-direction (left); induced by a temperature profile varying in z-direction, constant in x-direction (right). Note the different ranges of the ordinates

Back to article page