Skip to main content

Table 1 Material parameters considered in the physical modeling of the OGV part manufacturing process

From: A Simulation App based on reduced order modeling for manufacturing optimization of composite outlet guide vanes

\(k_1\) \(1.77 \cdot 10^{-5}\) s\(^{-1}\)
\(k_2\) \(9.30 \cdot 10^{2}\) s\(^{-1}\)
\(E_1/R\) 9, 200 K
\(E_2/R\) 6, 450 K
n 0.91
m 0.37
\(\Delta H\) 570 J/g
\(\eta _0\) \(3.10\cdot 10^{-12}\) Pa s
B 10800 K
C 27
d 1.77
\(c_\parallel \) \( 9.43\cdot 10^{-13}\) m\(^2\)
\(c_\perp \) \(2.50\cdot 10^{-12}\) m\(^2\)
\(V_{fa}\) \(78.5\%\)
\(p_0\) 0.1203 J/gK
\(p_1\) 0.005 J/gK\(^2\)
\(q_0\) 0.5905 J/gK
\(q_1\) 0.0019 J/gK\(^2\)
\(\rho _\text {resin}\) 1.26 g/cm\(^3\)
\(\rho _\text {fiber}\) 1.80 g/cm\(^3\)
\(V_{f0}\) \(57\% \)
\(\lambda _{11}\) 5.80 W/mK
\(\lambda _{22}\) 0.57 W/mK
\(\lambda _{33}\) 0.57 W/mK
  1. Courtesy of GE Global Research