Skip to main content
Figure 3 | Advanced Modeling and Simulation in Engineering Sciences

Figure 3

From: Component-based reduced basis for parametrized symmetric eigenproblems

Figure 3

The component library: a beam (left) and a connector (right). Components can connect at square ports shown in red. All ports have the same shape and same discretization: a square of side 1 with square mesh cells of side 0.2. The size of the archetype beam is 1×1×5 with cubic mesh cells with side edges of length 0.2. The connector is a combination of several cubes with side edges of length 1, such that its length is 3 along each of the three principal axis. The connector mesh is refined at the joints between the cubes where we expect higher stresses.

Back to article page